EN
CEE 32A 3Pin Female Socket Power Cord H07RN-F Neoprene 3*6mm² Cable with Ring Terminal or Open End
This industrial power cable is equipped with standard ZKUP1090 CEE 32A 3-pin female socket and H07RN-F neoprene rubber cable of 3*6mm² cross section, total standard length 3000mm as drawing requirement. Strictly follows EU electrical wiring rule: Brown for Live(L), Blue for Neutral(N), Yellow-Green for Ground(GND). One end is pre-fitted with IP44 rated CEE industrial plug; the opposite cable end is pre-stripped and crimped with copper ring terminals for quick on-site wiring connecting
Spu:
1601814217607
- Overview
- Recommended Products
About Product
Highlight
This industrial power cable is equipped with standard ZKUP1090 CEE 32A 3-pin female socket and H07RN-F neoprene rubber cable of 3*6mm² cross section, total standard length 3000mm as drawing requirement. Strictly follows EU electrical wiring rule: Brown for Live(L), Blue for Neutral(N), Yellow-Green for Ground(GND). One end is pre-fitted with IP44 rated CEE industrial plug; the opposite cable end is pre-stripped and crimped with copper ring terminals for quick on-site wiring connecting
Standard ZKUP1090 CEE 32A 3-pin female socket industrial plug with IP44 protection, secure locking structure for stable heavy current connection, meets EU industrial power standard.
High Grade H07RN-F Neoprene Rubber Cable 3*6mm² neoprene rubber outer sheath, excellent oil resistance, weather-proof, anti-aging and wear resistant, suitable for harsh outdoor & factory working environment.
Pre-installed Copper Ring Terminals Cable ends pre-crimped with standard 5.5mm inner diameter copper ring terminals, convenient direct screw wiring, save on-site installation time.
Strict Wiring Standard Configuration Fixed color coding: Brown=L, Blue=N, Yellow-Green=GND, consistent with EU electrical specification, avoid wrong wiring error.
Flexible OEM Customization Available Support custom cable length, plug type, terminal size and cable cross-section, factory direct production with stable delivery schedule.
Standard ZKUP1090 CEE 32A 3-pin female socket industrial plug with IP44 protection, secure locking structure for stable heavy current connection, meets EU industrial power standard.
High Grade H07RN-F Neoprene Rubber Cable 3*6mm² neoprene rubber outer sheath, excellent oil resistance, weather-proof, anti-aging and wear resistant, suitable for harsh outdoor & factory working environment.
Pre-installed Copper Ring Terminals Cable ends pre-crimped with standard 5.5mm inner diameter copper ring terminals, convenient direct screw wiring, save on-site installation time.
Strict Wiring Standard Configuration Fixed color coding: Brown=L, Blue=N, Yellow-Green=GND, consistent with EU electrical specification, avoid wrong wiring error.
Flexible OEM Customization Available Support custom cable length, plug type, terminal size and cable cross-section, factory direct production with stable delivery schedule.
About Us
Dongguan Nangudi Company was founded in 2006, specializes in designing and producing kinds of customized cable assembly. The company is located in Humen town, Donguan City, covers an area of 12000 ㎡ in total, is a national high-tech enterprise. There are over 350 employees , including 35 technicists and 31 QC staffs. We have achieved ISO9001, ISO14001, ISO13485, ISO27001, and IATF16949, as well as UL certificate, owned 80 more invention patents and technical achievements. Our products are widely used in new energy storage device, medical equipment, intelligent robot, industrial equipment, smart home appliance, vehicle, communication device, etc., all the products can be designed or amended dimension as per request.
Product Overview
Need a tough, field-ready power link to maintain a safe, continuous high-amperage electrical current through the roughest job sites? The premium CEE 32A 3pin female socket extension assembly paired with high-grade H07RN-F neoprene rubber cable manufactured by Dongguan Nangudi Company delivers a rugged, long-term interconnect solution. This heavy-duty heavy duty industrial power cord comes with a thick 3*6mm² conductor cross-section, specifically engineered from scratch to wipe out line voltage drops and manage heavy thermal build-ups during continuous operations. Terminated with factory-pressed copper ring tongue lugs or a clean, pre-stripped open end, this highly versatile CEE 32A extension cable complies fully with strict EU electrical safety codes. Built inside an IATF16949-certified facility by Dongguan Nangudi Company, this robust custom terminal wire harness guarantees zero signal drops, complete moisture proofing, and total stability across temporary construction job sites and heavy-load industrial workshop floors.
Detailed Structural Design & Engineering
In severe physical environments, your field equipment is only as strong as its primary power connection line. Standard plastic or thin PVC-jacketed lines tend to degrade rapidly, crack under sub-zero temperatures, or warp out of shape when dragged over rough concrete floors or exposed to accidental oil spills. This commercial-grade CEE 32A 3pin female socket cord configuration sets an absolute benchmark for physical toughness and electrical structural integrity.
On our specialized production floors, Dongguan Nangudi Company matches the standard ZKUP1090 CEE socket interface with genuine VDE-certified H07RN-F neoprene rubber cable shielding. The internal copper core is tightly packed with fine, multi-strand oxygen-free pure copper wires, which provide incredible routing flexibility alongside remarkably low electrical resistance. The heavy chloroprene/neoprene rubber outer jacket serves as an advanced structural shield against aggressive hydraulic fluids, ambient ozone, intense foot traffic, and direct ultraviolet sunlight. On the opposite connection end, the cable leads go through automated, pneumatic terminal machinery to install 5.5mm inner diameter copper ring terminals. This precise factory termination establishes a uniform, gas-tight compression bond that locks out oxygen and moisture. For engineering integration teams, this ready-to-install heavy duty industrial power cord eliminates tedious, time-consuming manual stripping on the job site, reducing assembly labor hours while eliminating human terminal crimping errors entirely from your production schedule.
Key Performance Features
Industrial CEE Locking Interface: The ruggedized CEE 32A 3pin female socket comes equipped with a spring-loaded physical locking cover and IP44 splash-proof defenses, guaranteeing a rock-solid, arcless connection under a 32A load.
All-Weather Neoprene Sheathing: The high-spec H07RN-F neoprene rubber cable compound retains excellent structural flexibility down to minus 25°C and prevents insulation breakdown during high-temperature thermal spikes up to plus 60°C.
Gas-Tight Copper Ring Terminals: Factory-crimped rings on this custom terminal wire harness deliver a massive metal contact footprint, keeping contact resistance minimal and preventing extreme heat accumulation at your distribution block screw studs.
Flawless EU Wiring Compliance: Follows standard European color-coding laws (Brown for Live, Blue for Neutral, Yellow-Green for Ground) to prevent dangerous cross-wiring errors during high-speed site installations.
Full OEM Sizing Flexibility: Dongguan Nangudi Company provides comprehensive design adjustments for this CEE 32A extension cable, accommodating specific wire run lengths, custom stripping depths, or alternative terminal options.
Technical Advantages & Advanced Manufacturing
At Dongguan Nangudi Company, engineering a high-quality heavy duty industrial power cord goes far beyond cutting bulk wire strands and hand-pressing metal eyes onto the ends. When a cable carries a continuous 32 Amp electrical load, tiny microscopic gaps inside a hand-crimped terminal barrel allow micro-arcing to take place. Over time, this micro-arcing creates localized resistive heating, which brittle-fractures the copper wire and causes massive field failures or electrical fires.
To completely prevent this operational danger, Dongguan Nangudi Company utilizes a highly automated manufacturing methodology. The factory setup employs digital cross-sectional crimp analyzers to examine the squashed core of the custom terminal wire harness on a regular basis, making sure that the copper strands form a completely solid, void-free cross-section. Furthermore, the outer H07RN-F neoprene rubber cable insulation undergoes routine dielectric strength testing and precise terminal pull-force validation. The internal contact terminals are housed securely within an IP44 structural body, protecting delicate electrical contact zones from airborne metallic dust and sudden liquid sprays. This deep technical competence ensures that your chosen CEE 32A extension cable functions flawlessly throughout years of constant handling in wet, oily, or sun-exposed industrial conditions.
Primary Industrial Applications
Temporary Construction Site Power: Acting as a highly reliable CEE 32A extension cable to route power from temporary generator stations to concrete mixers, welding setups, and high-draw machinery.
Industrial Factory Production Lines: Linking automated industrial machinery, commercial packaging systems, and heavy plastic extruders directly to wall drop boxes using a tough heavy duty industrial power cord.
Event Lighting & Mobile Power Distribution: Providing safe, continuous power loops for massive outdoor concert stages, temporary corporate exhibition tents, and broadcast trailer fleets.
Commercial EV Charging Infrastructure: Functioning as an intermediate, weather-resistant custom terminal wire harness for portable rapid charging modules, vehicle testing bays, and stationary industrial battery banks.
Commercial Value & Long-Term Supply Chain ROI
Choosing Dongguan Nangudi Company as your primary manufacturing partner brings instant commercial stability and logistics safety to your component procurement pipeline. Operating from a modern 12,000 square meter facility located in Humen Town, Dongguan Nangudi Company deploys an expert workforce of over 350 skilled professionals, including 35 advanced technicians and 31 strict QC staff members.
Integrating our certified CEE 32A 3pin female socket harness lines into your equipment setups or equipment rental catalog drastically drops field maintenance costs and cuts down on expensive machine downtime. Because our production facilities carry full ISO9001, ISO14001, ISO13485, ISO27001, and IATF16949 automotive-grade quality certifications, our H07RN-F neoprene rubber cable lines breeze through strict international safety audits on the very first try. Supported by more than 80 patents and technical achievements, the engineering staff at Dongguan Nangudi Company easily modifies any wire specifications you require. Partnering with us for your heavy duty industrial power cord needs lowers your long-term warranty overhead while giving your brand an elite product that protects your commercial reputation.
FAQs
Can you provide sample? Is it free?
Yes. We can provide sample, 1-5 pcs free samples is available for simple type. And the complex type should be charged depend on the exact cost of the raw material.
What's the lead time?
Our sample lead time is within 7-10 days, normal mass production lead time is 25 days.
What's your payment term?
We accept 30%-50% in advance, balance on ship, or as negotiated
What certificates do you have?
We have achieved ISO9001, ISO14001, ISO13485, ISO27001, and IATF16949, as well as UL certificate for wire processed and wire harness.
What QC standard you accordance to?
We produce and control the quality accordance to IPC-WHMA-620-D standard, 100% testing and inspection before shipping.
What's your products mainly used in?
Our products mainly used in filed of energy storage, Robot, Medical equipment, industrial equipment, home appliance.
